Setup - Nexcom Peak 555A User Manual

Peak 555A User's Guide
Drive A type/Drive B type
The category identifies the types of floppy disk drive A or drive B that
have been installed in the computer.
None
360K, 5.25 in
1.2M, 5.25 in
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
Video
The category selects the type of adapter used for the primary system
monitor that must match your video display card and monitor. Although
secondary monitors are supported, you do not have to select the type in

Setup.

You have two ways to boot up the system:
1. When VGA as primary and monochrome as secondary, the selection of
the
video tape is "VGA Mode".
2. When monochrome as primary and VGA as secondary, the selection of
the
video type is "Monochrome Mode".
EGA/VGA Enhanced Graphics Adapter/Video Graphics Array. For EGA,
VGA, SEGA, or PGA monitor adapters.
CGA 40 Color Graphics Adapter, power up in 40 column mode
CGA 80 Color Graphics Adapter, power up in 80 column mode
MONO Monochrome adapter, includes high resolution monochrome
adapters
BIOS Setup
No floppy drive installed
5-1/4 inch PC-type standard drive; 360 kilobyte
capacity
5-1/4 inch AT-type high-density drive; 1.2 megabyte
capacity
3-1/2 inch double-sided drive; 720 kilobyte capacity
3-1/2 inch double-sided drive; 1.44 megabyte
capacity
3-1/2 inch double-sided drive; 2.88 megabyte
capacity
4- 9