Nexcom Peak 555A User Manual page 38

Peak 555A User's Guide
month The month, Jan through Dec
year The year, depend on the year of BIOS
Time
The time format is <hour> <minute> <second>. which accepts both
function key or numerical key The time is calculated based on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00.
Primary Master/Primary Slave
The categories identify the types of drives that have been installed in the
computer. There are 45 predefined types and 2 user definable types are
for Enhanced IDE BIOS. Type 1 to Type 45 are predefined. Type User is
user-definable.
Press PgUp/<+> or PgDn/<−> to select a numbered hard disk type or type
the number and press <Enter>. Note that the specifications of your drive
must match with the drive table. The hard disk will not work properly if
you enter improper information for this category. If your hard disk drive
type is not matched or listed, you can use Type User to define your own
drive type manually.
If you select Type User, related information is asked to be entered to the
following items. Enter the information directly from the keyboard and
press <Enter>. This information should be provided in the documentation
from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is ESDI, the selection shall be "Type 1".
If the controller of HDD interface is SCSI, the selection shall be "None".
If the controller of HDD interface is CD-ROM, the selection shall be
"None".
CYLS.
HEADS
PRECOMP
LANDZONE
SECTORS
MODE
If a hard disk has not been installed select NONE and press <Enter>.
BIOS Setup
number of cylinders
number of heads
write precom
landing zone
number of sectors
HDD access mode
4- 8