Troubleshooting; Warranty - Holzmann DKS 20 User Manual

TROUBLESHOOTING

TROUBLE PROBLEM
Breaking blades Wrong tension
Overload
Wrong blade for designated
work
Twisting blade in wood
Not enough teeth
Motor does not run Defect cord
carbon brushes are worn
defect plug
defect ON/OFF switch
Excessive Vibration Improper saw underground
saw not mounted correctly
to underground
Loose table
Blade not in line Blade holders not aligned

WARRANTY

Holzmann Maschinen grants 1 year of full spare part warranty onto this product.
For eventual warranty issues please save your sales receipt and hand them in to your HOLZMANN reseller.
Warranty exclusions:
>> wearing parts in general
>> Any damages caused by unappropriate
handling, operation, electric connection or by insufficient maintenance.
POSSIBLE SOLUTION
Adjust blade tension properly
Reduce the feed rate and do not apply pressure
onto the blade
Choose the correct blade for the intended
operation.
Avoid side pressure on blade
check that at least 3 teeth are simultaneously in
the workpiece. For a blade with 10 teeth per
inch the minimum workpiece height is 1/3 inch
Let be replaced
Let be replaced
check the power plug in your powr supply
Let be replaced
change
Check and tighten bolts if necessary
tighten table lock knob
loosen cap screws holding blade to upper and
lower arms. Adjust position of blade holders.