1.
Go to the CAL main level.
2.
Enter the master access passcode as described in Passcode.
3.
Go to CAL2.
4.
Select a color (RED, GREN, or BLUE).
5.
Select a color value (000-255).
6.
Repeat for the other colors.
•
When selecting CAL > CAL2, you will only be able to define the values of RED,
GREN (green), and BLUE.
•
The values of RED, GREN (green), and BLUE configured from CAL > CAL2 will
define the color temperature shown when the RGB faders are set to 255 if SET >
COLR > RGBW is active.
Static Color
The Static Color mode allows for permanent RGBW color mixing without a DMX controller.
1.
Go to the STAT main level.
2.
Select the desired color or effect (RED, GREN, BLUE, WHIT, STRB, or ZOOM).
3.
Select the color or effect value (000-255 for colors and effect, or 00-20 for strobe).
4.
Repeat for the other colors or effects.
Page 25 of 29
Colorado 1 Quad Zoom User Manual Rev. 1
O
PERATION