Page 2
Chauvet has no obligation to make, and does not commit to make, any such revisions.. The COLORado 1 Solo User Manual Rev. 1 is the first edition of this manual. Go to Document www.chauvetprofessional.com...
Whites Setting .................................... 14 White Calibration ..................................14 Static Color ....................................14 Color Temperature Settings ............................... 14 Zoom Mode ....................................14 LED Frequency ..................................14 Software Information ..............................14 RDM ......................................14 Configuration (DMX) ..............................15 COLORado 1 Solo User Manual Rev. 1...
Page 4
DMX Values (Cont.) ..............................22 DMX Values (Cont.) ..............................23 DMX Values (Cont.) ..............................24 5. Technical Information ..........................25 Product Maintenance ..............................25 6. Technical Specifications ......................... 26 Returns ..................................27 Contact Us ..............................28 -ii- COLORado 1 Solo User Manual Rev. 1...
If the box or the contents (the product and included accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection.
This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly trained Chauvet certified technicians. Do not open the housing or attempt any repairs.
This powerful wash product projects an even, fully homogenized beam through fast and smooth zooming optics. The COLORado 1 Solo features new IP rated power and data connectors, full convection cooling, and a double-bracketed yoke that can serve as a floor mount or hanging support bracket.
Introduction Overview Double-Bracketed Yoke Safety Cable Loop Yoke Adjustment Knob Side View Top View Frame Holder Clip Control Panel Data Out Data In Power Out Power In Rear View Front View COLORado 1 Solo User Manual Rev. 1...
Each COLORado 1 Solo has an auto-ranging power supply that works with an input voltage AC Power range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each COLORado 1 Solo, refer to the label affixed to the product. You can also refer to the Technical Specifications chart in this manual.
Setup You can link the COLORado 1 Solo to a DMX controller using a 5-pin DMX connection. If using DMX Linking other DMX-compatible products with the COLORado 1 Solo, you can control each individually with a single DMX controller. The COLORado 1 Solo uses a 5-pin DMX data connection for the HSIC, SSP, TOUR, TR16, and STD.Y DMX personalities.
When hanging this product, always secure to a fastening device using a safety cable. For our CHAUVET Professional line of safety cables, go to http://trusst.com/products/. The COLORado 1 Solo comes with a double-bracketed yoke to which you can either attach Procedure mounting clamps for hanging or simply use as a floor stand.
Navigates downward through the menu list or decreases the numeric value when in a function Control Set the COLORado 1 Solo starting address in the 001–512 DMX range. This enables control of up to 30 products in the 17-channel TR16 personality. Options...
Changes the beam angle (zoom) PROGRAM SCENE 000– EDIT Selects the strobe frequency 01-10 01–30 STROBE (0–25 Hz) Defines the step duration TIME (slow to fast) Defines the fade duration FADE (slow to fast) -10- COLORado 1 Solo User Manual Rev. 1...
Passcode) Defines the color temperature used when RGBW 000–255 COLOR is set to RGBW. VERSION V0.1 Shows installed software version INFO 0x21A40067____ Displays Current UID # LABEL COLORado 1 SoLo Product Name COLORado 1 Solo User Manual Rev. 1 -11-...
The DMX controller may interfere with signals from the master. · The master should be the first product in the daisy chain. The COLOR setting determines how the COLORado 1 Solo generates the white color based on Color Settings various RGB settings.
Operation This setting determines how fast the output of the COLORado 1 Solo changes when you modify Dimmer Profiles the values of the red, green, blue, white, and dimmer faders. This setting provides four different options to simulate the dimming curve of an incandescent lighting product.
6. Repeat for the other colors. White Calibration This setting allows you to select the white color shown by the COLORado 1 Solo when the color setting is RGBW and the DMX controller’s red, green, and blue faders are set to 255.
Select SAVE to make the product use the last command used when the signal is lost. b. Select BLACK to turn off the all the LEDs when the signal is lost. COLORado 1 Solo User Manual Rev. 1 -15-...
When dimmer is set to OFF, the changes in the RGBW and master dimmer faders are linear. · When dimmer is set to DIM1–DIM4, DIM1 is the fastest dimmer curve and DIM4 is the slowest. -16- COLORado 1 Solo User Manual Rev. 1...
236ó240 White 8 241ó245 White 9 246ó250 White 10 251ó255 White 11 000ó009 No function 010ó099 0–25 Hz 100ó109 No function Strobe Effect 110ó179 Lightning Strobe 180ó189 No function 190ó255 Random Strobe COLORado 1 Solo User Manual Rev. 1 -17-...
236ó240 White 8 241ó245 White 9 246ó250 White 10 251ó255 White 11 000ó009 No function 010ó099 0–25 Hz 100ó109 No function Strobe Effect 110ó179 Lightning Strobe 180ó189 No function 190ó255 Random Strobe COLORado 1 Solo User Manual Rev. 1 -19-...
236ó240 White 8 241ó245 White 9 246ó250 White 10 251ó255 White 11 000ó009 No function 010ó099 0–25 Hz 100ó109 No function Strobe Effect 110ó179 Lightning Strobe 180ó189 No function 190ó255 Random Strobe COLORado 1 Solo User Manual Rev. 1 -21-...
6. Wipe any dirt or grime to the outside edges of the lens surface. 7. Gently polish the lens surfaces until they are free of haze and lint. Always dry the external surfaces thoroughly and carefully after cleaning them. COLORado 1 Solo User Manual Rev. 1 -25-...
113 °F (45 °C) Convection I/O Connectors Connector Type Channel Range Seetronic IP65 5-pin XLR Sockets 9, 12 or 17 Ordering Product Name Item Code UPC Number COLORado 1 Solo 01031124 781462214722 -26- COLORado 1 Solo User Manual Rev. 1...
Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return. Clearly label the package with an RMA number. Chauvet will refuse any product returned without an RMA number. DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed label.
+52 (728) 285-5000 Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of record. Follow their instructions to request support or to return a product. Visit our website for contact details. COLORado 1 Solo User Manual Rev. 1...