Table of Contents Table of Contents 1. Before You Begin ....................1 What Is Included ......................... 1 Unpacking Instructions ......................1 Claims ............................1 Typographic Conventions ....................1 Icon Indications ........................1 Product at a Glance ......................2 Safety Notes ........................2 Personal Safety ...........................
Page 4
Table of Contents Menu Map ......................... 16 DMX Values ........................18 TOUR ............................18 TOUR (cont.) ..........................19 ARC.1 ............................19 AR1.D ............................19 ARC.2 ............................19 AR2.D ............................19 AR2.S ............................19 HSV ............................19 5. Technical Information ..................20 Product Maintenance ......................
CHAUVET®. Failure to notify the carrier in a timely manner may invalidate your claim. In addition, keep the container and all the packing material for inspection.
There are no user-serviceable parts in this product. Any reference to servicing in this User Manual applies only to properly certified CHAUVET® technicians. Do not open the housing or attempt any repairs unless you are certified by CHAUVET®. Please refer to all applicable local codes and regulations for proper installation of this product.
Introduction 2. Introduction Product The COLORado™ 1 Quad Tour is a high-power quad color RGBW LED wash product. This product consists of a single module that houses the internal power supply, the main Description control, the control panel, the LED drivers, the LED boards, as well as the power and signal connectors.
Introduction Product Overview Quad Color LEDs Front View Power Out Power In Data Out Data In Control Panel Rear View Adjustment Knob Safety Cable Loop Double-bracketed Yoke Side View COLORado™ 1 Quad Tour User Manual Rev. 01...
The listed current rating indicates the maximum current draw during normal operation. For more information, download Sizing Circuit Breakers from the CHAUVET® website: www.chauvetpro.com. Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0% to 100% switch.
If you are not familiar with or need more information about DMX standards, Master/Slave connectivity, or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the CHAUVET® website: www.chauvetpro.com. DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX controller signals may interfere with the signals from the master product.
Rigging The COLORado™ 1 Quad Tour consists of a double-bracketed yoke and the body of the product CHAUVET® recommends using the following general guidelines when mounting this product. · When selecting an installation location, consider easy access to this product for operation, programming adjustments, and routine maintenance.
Operation 4. Operation Control Panel Button Function Description Exits from the current menu or function <MENU> Enables the currently displayed menu or <ENTER> sets the currently selected value in to the current function Navigates upward through the menu list and <UP>...
Operation DMX Control In this mode, each product will respond to a unique starting address from the DMX controller. All products with the same starting address will respond in unison. 1. Select a DMX personality as shown in DMX Personality. 2.
Operation Static Color The Static Color mode allows for permanent RGBW color mixing without a DMX controller. 1. Go to the STAT main level. 2. Select the desired color (RED, GREN, BLUE, or WHIT). 3. Select the desired color value (000~255). 4.
Operation Color Settings The COLOR setting determines how the COLORado™ 1 Quad Tour generates the white color based on various RGB settings. 1. Go to the SET main level. 2. Select COLO. 3. Select OFF, RGB.W, or UC. OFF: When all the RGB faders are set to 255, the output is maximum, although the resulting white color may not be balanced.
· Green indicates that the upload process completed successfully. · Red indicates that the upload process failed due to an error. Recheck all cable connections and restart the process. If the issue persists, contact CHAUVET® Technical Support. DO NOT upload the data from a COLORado™ 1 Quad Tour to a different product.
Operation Reset This setting allows you to reset the COLORado™ 1 Quad Tour to the default values, including the custom programs. 1. Go to the SET main level. 2. Select REST. 3. When PASS shows, press <ENTER>. 4. Enter the master access password as described in Control Panel Lock.
Operation TOUR Notes These notes clarify the way the TOUR DMX personality works. · Channel 1 controls the intensity of the currently projected color. Master Dimmer · When the slider is at the highest position (100%), the intensity of the output is at maximum.
Operation Menu Map Main Level Programming Levels Description User can combine Red, GREN 000~255 Green, Blue and White to (0~100%) BLUE generate a custom color STAT WHIT 00~20 Select a strobe frequency STRB (0~20 Hz) (0~20 Hz) Choose from 10 automatic AT.
Page 21
Operation Main Level Programming Levels Description UPLD Enter password Defaults product REST Enter password Defaults product No dimmer DIM1~4 Dimmer speed All LEDs turn off when DMX BLAK signal is lost DERR All LEDs stay on the last command used when the SAVE DMX signal is lost RGB set to “255”...
Operation DMX Values TOUR Channel Function Value Percent/Setting 000 ó 255 0~100% Dimmer 0~100% 000 ó 255 Step Time When CUS. 01-10 in CH. 8 is activated Green 0~100% 000 ó 255 Step Time When CUS. 01-10 in CH. 8 is activated 000 ó...
Operation TOUR Channel Function Value Percent/Setting (cont.) 000 ó 255 Only when CH. 8 is Auto 1~10 is activated Auto Speed 000 ó 009 Preset dimmer speed from display menu 010 ó 029 Linear dimmer 030 ó 069 Nonlinear dimming curve 1 (fastest) Dimmer Speed 070 ó...
Technical Information 5. Technical Information Product To maintain optimum performance and minimize wear, you should clean this product frequently. Usage and environment are contributing factors in determining the cleaning Maintenance frequency. As a rule, clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating.
Faulty Display/Main/DMX interface board Send product for repair If you still experience technical problems after trying the above solutions or if you need to send the product for repair, contact CHAUVET® Technical Support. COLORado™ 1 Quad Tour User Manual Rev. 01 -21-...
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be the customer’s responsibility. Proper FedEx packing or double-boxing are the packaging methods CHAUVET® recommends. CHAUVET® reserves the right to use its own discretion to repair or replace returned product(s). Contact Us World Headquarters United Kingdom &...
Technical Information Technical Specifications Dimensions and Length Width Height Weight Weight 7.5 in (191 mm) 9.4 in (239 mm) 12.6 in (319 mm) 11.5 lbs (5.22 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Supply Type Range Voltage Selection Electrical...
Need help?
Do you have a question about the Colorado 1-Quad tour and is the answer not in the manual?
Questions and answers