Static Color; Auto Programs; Auto Test; Master/Slave - Chauvet Colordash Par-Quad 7 User Manual

Operation

Static Color

Auto Programs

Auto Test

Master/Slave

-10-
The Static Color mode allows for permanent RGBA color mixing without a DMX
controller.
1. Go to the Static main level.
2. Select the Fix C.
a. Choose desired color combination.
3. Select the Manu C
a. Select Color (RGBA)
b. Select the desired color value (000~255).
c. Repeat for the other colors.
Auto programs allow for dynamic RGBA color mixing without a DMX controller.
1. Go to AUTO Main Level.
2. Select the desired auto (Auto. 1~5).
3. Select Speed.
4. Choose the desired speed value (000~100).
You cannot edit any of the auto programs (AUTO 1~5).
This option allows you to test all the LED's on the COLORdash™ Par-Quad 7.
1. Go to Info Main Level.
2. Select Auto > Test.
The Master/Slave mode allows a group of COLORdash™ Par-Quad 7s (the slave
products) to simultaneously duplicate the output of another COLORdash™ Par-Quad 7
(the master product) without a DMX controller.
1. Set each of the slave products:
a. Go to M&S Mode.
b. Select SLAVE.
2. Set the master product:
a. Set the running mode to Master as explained in
b. Select an Auto or Static program as explained in
• The master product is the one that runs a program whether in Auto, or Static
Color mode.
• Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master
product.
• The master product should be the first product in the daisy chain.
DMX Control.
Auto Programs.
COLORdash™ Par-Quad 7 User Manual Rev. 1