Configuration (Standalone); Static Color; Automatic And Sound-Active Mode - Chauvet COLORstrip User Manual

Configuration
(Standalone)

Static Color

Automatic and
Sound-Active
Mode
COLORstrip/COLORstrip Mini User Manual Rev. 1
Set the product in one of the standalone modes to control without a DMX controller.
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
To run the COLORstrip/COLORstrip Mini on a static color, follow the instructions below:
1. Press <MODE> repeatedly until SYS or ACt shows on the display.
2. Use <UP> or <DOWN> to select ACt.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to scroll through the menu until A001–A007 shows on the
display.
5. Press <ENTER> and F_ _ _ will show on the display.
6. Use <UP> or <DOWN> to increase or decrease the strobe value.
·
Set F000 for no strobe.
·
Set F100 for sound-active strobe (Sensitivity knob must be turned up).
·
Set F001–F099 for auto strobe, from slow to fast.
7. Press <ENTER>.
To run a color chase, do the following:
1. Press <MODE> repeatedly until SYS or ACt shows on the display.
2. Use <UP> or <DOWN> to select ACt.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to scroll through the menu until A008–A020 or A022–A023
shows on the display.
5. Press <ENTER> and P_ _ _ will show on the display.
6. Use <UP> or <DOWN> to increase or decrease the program speed.
·
Set P000 for sound-active only (Sensitivity knob must be turned up).
·
Set P001–P100 for auto mode, from slow to fast.
7. Press <ENTER>. For A008–A011, F_ _ _ will show on the display.
8. Use <UP> or <DOWN> to increase or decrease the strobe value.
·
Set F000 for no strobe.
·
Set F100 for sound-active strobe (Sensitivity knob must be turned up).
·
Set F001–F099 for auto strobe, from slow to fast.
9. Press <ENTER>.
For Sound-Active mode, turn the Sensitivity knob up until the product responds to the
beat of the music.
In Sound-Active modes, the product will only respond to low frequencies of
music (bass and drums).
Page 11 of 18