Dimmer Profiles; Curve Settings - Chauvet Colorado 1 Quad Zoom User Manual

Dimmer Profiles

This setting determines how fast the output of the Colorado 1 Quad Zoom changes when you modify the
values of the red, green, blue, amber, and dimmer faders. This setting provides four different options to
simulate the dimming curve of an incandescent lighting product.
1. Go to the SET main level.
2. Select DIMX.
3. Select a dimmer curve (OFF, DIM1, DIM2, DIM3, or DIM4).
OFF: The output is proportional (linear) to the dimmer and RGBW channel values.
Dimmer 1-4: The output follows the dimmer and RGBW channel values based on the
corresponding dimmer curve, DIM1 being the fastest.

Curve Settings

This setting determines how fast the output of the Colorado 1 Quad Zoom changes when you modify the
values of the red, green, blue, amber, and dimmer faders. This setting provides Three different options to
simulate the dimming curve of an incandescent lighting product.
1. Go to the SET main level.
2. Select CURV.
3. Select a dimmer curve (OFF, CV1, CV2, or CV3).
OFF: The output is proportional (linear) to the dimmer and RGBW channel values.
CV1-3: he output follows the dimmer and RGBW channel values based on the
corresponding dimmer curve, CV1 being the fastest and CV3 the slowest.
For optimum control of the 16-bit dimming channels in the TR16, FULL, and
STD.Y personalities, be sure that both dimming curves in SET > DIMX and SET >
CURV are set to OFF
• When the control panel lock is active, the product will prompt you to enter the
passcode after 30 seconds of control panel inactivity or after turning on the
product. See Passcode.
Page 23 of 29 Colorado 1 Quad Zoom User Manual Rev. 1
O
PERATION