Table 26-9: Softkey Parameters - AudioCodes 420HD Administrator's Manual


To configure softkeys using Configuration File
Use the table below as reference:
Parameter Name
Softkey
[personal_settings/soft_key/n-n] (Idle Call State)
[personal_settings/soft_keys/ongoing_call/n-n]
(Ongoing call state)
Function (Idle call state):
[personal_settings/soft_key/n-n/key_function]
Function (Ongoing call state):
[personal_settings/soft_keys/ongoing_call/n-n/
key_function]
Number
personal_settings/soft_key/n-n/speed_dial_nu
mber=<number>
Where <number> is the telephone number which
the speed dial dials.
[personal_settings/soft_keys/n-n/psk_index]
(Idle call state)
[personal_settings/soft_keys/ongoing_call/n-n/
psk_index] (Ongoing call state)
Where n-n is the softkey number.
Administrator's Manual

Table 26-9: SoftKey Parameters

Indicates the softkey number.
Where <n-n> defines the softkey number.
Possible values: 0-19
Select one of the following key function types
for the Idle call state:










Select one of the following key function types
for the Ongoing call state (configuration file
only):






•

Define the telephone number which the speed
dial dials. The speed-dial feature helps users
quickly dial numbers that are frequently used
or that are hard to remember.
Defines the PSK index. This index identifies
the PSK which is assigned to the softkey.
You can define up to 11 PSKs (0-11).
Default=12 (non-valid value)
Note that there are separate index number
series for the Idle and Ongoing call states.
However, each index number represents
unique functionality. For example, if you
configure psk_index 1 to activate an intercom
(an Idle state function), you cannot use the
same index (psk_index 1) to connect to a
Voicemail server (Ongoing Call state
function).
188
400HD Series IP Phones
Description
Missed_calls
Received_calls
Dialed_calls
All_calls
Directory
Dnd_all
Forward_all
Speed dial
Speed dial + blf
PSK
Rec_call
Transfer
Blind_transfer
Hold
Conf
New_call
End
PSK
Document #: LTRT-11950