Running In Debug Mode; Running The Hear-It! Application Code - Renesas RX231 User Manual

Hear-it! Solution Kit
5.5

Running in Debug Mode

Click the arrow next to the debug
button (bug icon). Select 'Debug
Configurations
The 'Debug Configurations' dialog box will appear.
Click the small arrow next to the 'Renesas GDB
Hardware Debugging' option.
The debug configurations for each project will
appear. The examples
application rx231_dsp_demo are shown to the
right. Select the entry for the required debug
configuration.
If the configuration has been built and the required
executable is present, the 'Debug' button in the
bottom right of the window will be active.
Click the 'Debug' button to continue. e
now connect to the debugger and download the
code to the target.
A firewall warning may be displayed for 'e2-server-
gdb.exe'. Check the 'Private networks, such as
my home or work network' box and click 'Allow
access'.
A user account control dialog may be displayed.
Enter the administrator password and click 'Yes'.
After downloading the code a dialog box will
appear asking if you would like to switch to the
'Debug perspective'.
decision' to prevent this dialog box from appearing
in future, then click 'Yes'.
2
e studio will load the new perspective, which is
optimised for debugging.
5.6

Running the Hear-it! Application Code

Once the code has been downloaded, click the 'Resume' button
main function is the default program entry point. The program counter will stop on the first instruction in the
main function.
Click the 'Resume' button
Follow the instructions on the PMOD
R12UZ0012EG0110 Rev. 1.10
Apr 03, 2017
for the streaming
2
studio will
Click 'Remember
in the 'Debug' perspective to run the rest of the code.
TM
display.
my
to run the code to the main function. The
5 Embedded Firmware Application
Page 23 of 34