Renesas RX231 User Manual page 4

1. Purpose and Target Readers
This manual is designed to provide the user with an understanding of the demonstration application, how to use
2
e studio IDE to develop and debug software for the Hear-it! Solution Kit. It is intended for users designing code
on the Hear-it! Solution Kit, using the many different incorporated peripheral devices.
The manual comprises of step-by-step instructions to load and debug a project in e
to be a complete guide to software development on the Hear-it! Solution Kit. Further details of the RX231
microcontroller may be found in the RX231 Group Hardware Manual and within the provided demonstration
code.
Particular attention should be paid to the precautionary notes when using the manual. These notes occur
within the body of the text, at the end of each section, and in the Usage Notes section.
The revision history summarizes the locations of revisions and additions. It does not list all revisions. Refer
to the text of the manual for details.
The following documents apply to the Hear-it! Solution Kit. Make sure to refer to the latest versions of these
documents. The newest versions of the documents listed may be obtained from the Renesas Electronics Web
site.
Document Type
Quick Start Guide
Schematics
Hardware Manual
BSP FIT application
note
DMACA FIT
application note
CMT FIT
application note
R12UZ0012EG0110 Rev. 1.10
Apr 03, 2017
How to Use This Manual
Description
Provides simple instruction to
setup the solution kit and run
the first sample.
Full detail circuit schematics
of Hear-it!
Provides technical details of
the RX231 MCU.
Provides technical details of
how to integrate and use the
BSP FIT module.
Provides technical details of
how to integrate and use the
DMACA FIT module.
Provides technical details of
how to integrate and use the
CMT FIT module.
Document Title
Quick Start Guide
Hear-it! Solution Kit
Schematics
RX230 Group, RX231
Group User's Manual:
Hardware
Board Support Package
Module Using Firmware
Integration Technology
DMA Controller DMACA
Control Module Using
Firmware Integration
Technology
CMT Module Using
Firmware Integration
Technology
2
studio, but does not intend
Document No.
R12QS0007EG
R01UH0692EG
R01UH0496EJ
R01AN1685EJ
R01AN2063EJ
R01AN1856EU
Page 4 of 34