Renesas RX231 User Manual page 3

Disclaimer
By using this Solution Kit, the user accepts the following terms:
The Solution Kit is not guaranteed to be error free, and the entire risk as to the results and performance of the
Solution Kit is assumed by the User. The Solution Kit is provided by Renesas on an "as is" basis without warranty
of any kind whether express or implied, including but not limited to the implied warranties of satisfactory quality,
fitness for a particular purpose, title and non-infringement of intellectual property rights with regard to the Solution
Kit. Renesas expressly disclaims all such warranties. Renesas or its affiliates shall in no event be liable for any loss
of profit, loss of data, loss of contract, loss of business, damage to reputation or goodwill, any economic loss, any
reprogramming or recall costs (whether the foregoing losses are direct or indirect) nor shall Renesas or its affiliates
be liable for any other direct or indirect special, incidental or consequential damages arising out of or in relation to
the use of this Solution Kit, even if Renesas or its affiliates have been advised of the possibility of such damages.
Precautions
The following precautions should be observed when operating any Solution Kit product:
This Solution Kit is only intended for use in a laboratory environment under ambient temperature and humidity
conditions. A safe separation distance should be used between this and any sensitive equipment. Its use outside the
laboratory, classroom, study area or similar such area invalidates conformity with the protection requirements of the
Electromagnetic Compatibility Directive and could lead to prosecution.
The product generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment causes harmful interference to radio or television reception, which can be determined by turning the
equipment off or on, you are encouraged to try to correct the interference by one or more of the following measures;
•
ensure attached cables do not lie across the equipment
•
reorient the receiving antenna
•
increase the distance between the equipment and the receiver
•
connect the equipment into an outlet on a circuit different from that which the receiver is connected
•
power down the equipment when not in use
•
consult the dealer or an experienced radio/TV technician for help NOTE: It is recommended that wherever
possible shielded interface cables are used.
The product is potentially susceptible to certain EMC phenomena. To mitigate against them it is recommended that the
following measures be undertaken;
•
The user is advised that mobile phones should not be used within 10m of the product when in use.
•
The user is advised to take ESD precautions when handling the equipment.
The Solution Kit does not represent an ideal reference design for an end product and does not fulfil the regulatory
standards for an end product.
R12UZ0012EG0110 Rev. 1.10
Apr 03, 2017
Page 3 of 34