Volume Control - Renesas RX231 User Manual
Rx200 series, hear-it! solution kit for e2 studio
Hide thumbs
Also See for RX231:
- Application note (88 pages) ,
- User manual (53 pages) ,
- Manual (25 pages)
Table of Contents
Advertisement
Hear-it! Solution Kit
6 Description of Software
6.2.4
Volume Control
The volume of the audio signal is controlled by default by an attenuation function in software. This is called when
the audio block is transferred to the transmit buffer prior to transmission to the CODEC for output. Optionally,
the volume can be controlled directly by the CODEC, based on configuration in the source code. See section
5.3.1.3 for further details.
R12UZ0012EG0110 Rev. 1.10
Page 29 of 34
Apr 03, 2017
Advertisement
Table of Contents
