Table of Contents
Advertisement
Assembling the
Connect the bus cable to the PROFIBUS bus connector with the order
Bus Cable
number 6CGK1500-0EA00 as follows:
1. Strip the insulation off the cable.
2. Insert the green and red wires into the screw-type terminal block.
3. Press the cable sheath between both sides of the screw-type terminal.
4. Screw the green and red wires tightly into the screw-type terminal.
Figure 3-12
3.5.2
Bus Connector 6ES7 972-0B.20-0XA0
Appearance
Figure 3-13 shows the bus connector 6ES7 972-0B.20 ...:
(6ES7-972-0B.20 ...)
Figure 3-13
C7-626 / C7-626 DP Control Systems
C79000-G7076-C626-01
Configuring MPI Networks and PROFIBUS-DP Networks
Cable shield
PROFIBUS bus cable
6XV1 830-0AH10
Connecting the PROFIBUS Bus Cable to the Screw-Type Terminal
Block
Screws for fixing
to station
Switch for
terminating resistance
PG-type connector
(only with 6ES7
972-0BB20-0XA0)
Bus Connector (Order Number 6ES7 972-0B.20 ...)
Screw clamp for the
bus cable connection
9-pin sub D connector
for connection to station
Housing screw
Clamp-type hinge
for vertical or 30
outgoing cable
3-19
3
Hide quick links:
Advertisement
Table of Contents
