Table of Contents
Advertisement
2.4
Arranging the C7 in the Mechanical Environment
Arranging the C7
When installing a C7, please note the following:
Figure 2-7
C7-626 / C7-626 DP Control Systems
C79000-G7076-C626-01
The control panel may be 1 to 4 mm thick. Make sure the sealing ring fits
tightly in all places.
A gap of 50 to 70 mm from a housing wall must be observed on the sides
of the C7 as shown in Figure 2-7.
The sealing ring on the frontplate must sit perfectly.
The tabs of the insertion strips must not be caught.
The C7 must be protected from direct sunlight.
70
Gap Dimensions to be Observed when Installing the C7
Installing and Preparing the C7
50
70
50
2
2-9
Hide quick links:
Advertisement
Table of Contents
