Siemens SIMATIC C7-626 Installation, Assembly, Wiring page 5

Preface
Purpose
The information in this manual will enable you to do the following:
Audience The manual is divided to take into account two different types of reader:
Contents of This This manual describes the hardware and software of the C7-626 and C7-626
Manual DP. It consists of two volumes.
Volume 1 of the manual covers the following topics:
C7-626 / C7-626 DP Control Systems
C79000-G7076-C626-01
Install and wire a C7-626 or C7-626 DP (Volume 1).
Assign parameters to the CPU of the C7-626 or C7-626 DP, load a user
program into this CPU and run the program (Volume 2).
Put the C7-626 and C7-626 DP into operation and use the operator
interface (O/I) functions (Volume 2).
Volume 1:
Users who carry out the mechanical and electrical installation of the C7 at
the location of use and who bring the C7 to a state of readiness for
immediate use.
Volume 2:
Users who create control programs and O/I configurations, load them into
the C7, and print out screen displays and messages.
Installation and preparation of the C7-626 or C7-626 DP
Networking the C7-626 or C7-626 DP with programming devices (PGs)
and other devices
Connecting the digital and analog I/Os
Connecting the I/Os to the universal inputs
Connecting the IM361 interface module
Connecting a printer to the C7
iii