Connecting A Programming Device/Pc To A C7 - Siemens SIMATIC C7-626 Installation, Assembly, Wiring

Connecting a Programming Device / PC to a C7
4.1

Connecting a Programming Device/PC to a C7

Possibilities
Connecting a
Programming
Device/PC to a C7
4
4-2
This chapter explains how you can connect a programming device or PC to
the C7 via a multipoint interface.
You can connect a programming device or PC with the MPI of the C7 using a
prefabricated programming device cable.
Alternatively, you can make up the connecting cable yourself using the
PROFIBUS bus cable and bus connectors (see Section 3.5).
Figure 4-1 shows the components for connecting a programming device/PC
to a C7.
Programming Device/PC
Figure 4-1 Connecting a Programming Device/PC to a C7
C7
Programming
device cable
C7-626 / C7-626 DP Control Systems
C79000-G7076-C626-01