Automatic Software Update By Aca - Hirschmann RS20 Reference Manual

Basic Settings
File not found (reason: file name not found or does not exist).
Connection error (reason: path without file name).
After the update is completed successfully, you activate the new software:
Select the Basic settings: Restart dialog and perform a cold start.
In a cold start, the device reloads the software from the non-volatile
memory, restarts, and performs a self-test.
In your browser, click on "Reload" so that you can access the device again
after it is booted.
1.3.4

Automatic software update by ACA

The device also allows you to perform an automatic software update using
the ACA. You will find the relevant details in the document "Basic
Configuration User", chapter "Automatic Software Update by ACA".
RM Web L2E
Release 6.0 07/2010
1.3 Software
25