Switching Global - Hirschmann RS20 Reference Manual

Switching

4.1 Switching Global

Variable Meaning
MAC address Display the MAC address of the device
(read only)
Aging Time (s) Enter the Aging Time in seconds for
dynamic MAC address entries.
In connection with the router redundancy,
select a time ≥ 30 s.
Flow control Activate/deactivate the flow control
Note: When you are using a redundancy
function, you deactivate the flow control
on the participating ports. Default setting:
flow control deactivated globally and
activated on all ports.
If the flow control and the redundancy
function are active at the same time, there
is a risk of the redundancy failing.
Learning Activate/deactivate the learning of MAC
addresses source addresses.
Frame size Set the maximum packet size (frame size)
in bytes.
Activate Enable/disable whether the device
Address detects whether it has repeatedly learned
Relearn the same MAC source addresses at
Detection different ports. This process very probably
indicates a loop situation in the network.
If the device detects this process, it
creates an entry in the log file and sends
an alarm (trap).
Table 28: Switching:Global dialog
76
4.1 Switching Global
Possible Values
15-3.825 30
On, Off Off
On, Off On
1522, 1632 1522
On, Off Off
Release 6.0 07/2010
RM Web