Password / Snmpv3 Access - Hirschmann RS20 Reference Manual

Security

2.1 Password / SNMPv3 access

This dialog gives you the option of changing the read and read/write
passwords for access to the device via the Web-based interface, via the CLI,
and via SNMPv3 (SNMP version 3). Please note that passwords are case-
sensitive.
Set different passwords for the read password and the read/write password
so that a user that only has read access (user name "user") does not know,
or cannot guess, the password for read/write access (user name "admin").
If you set identical passwords, when you attempt to write this data the device
reports a general error.
The Web-based interface and the user interface (CLI) use the same
passwords as SNMPv3 for the users "admin" and "user".
Select "Modify read-only password (user)" to enter the read password.
Enter the new read password in the "New password" line and repeat your
entry in the "Please retype" line.
Select "Modify read-write password (admin)" to enter the read/write
password.
Enter the read/write password and repeat your entry.
Figure 14: Dialog Password/SNMP Access
40
2.1 Password / SNMPv3 access
RM Web
Release 6.0 07/2010