Verifying The Hsrp Configuration - Cisco Nexus 3000 Series Configuration Manual

Verifying the HSRP Configuration

S e n d d o c u m e n t c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
Verifying the HSRP Configuration
To display the HSRP configuration information, perform one of the following tasks:
Command
show hsrp [group group-number]
show hsrp delay [interface interface-type
slot/port]
show hsrp [interface interface-type slot/port]
show hsrp [group group-number] [interface
interface-type slot/port] [active] [all] [init]
[learn] [listen] [speak] [standby]
show hsrp [group group-number] [interface
interface-type slot/port] active] [all] [init]
[learn] [listen] [speak] [standby] brief
Configuration Examples for HSRP
This example shows how to enable HSRP on an interface with MD5 authentication and interface
tracking:
key chain hsrp-keys
key 0
key-string 7 zqdest
accept-lifetime 00:00:00 Jun 01 2008 23:59:59 Sep 12 2008
send-lifetime 00:00:00 Jun 01 2008 23:59:59 Aug 12 2008
key 1
key-string 7 uaeqdyito
accept-lifetime 00:00:00 Aug 12 2008 23:59:59 Dec 12 2008
send-lifetime 00:00:00 Sep 12 2008 23:59:59 Nov 12 2008
feature hsrp
track 2 interface ethernet 2/2 ip
interface ethernet 1/2
no switchport
ip address 192.0.2.2/8
hsrp 1
authenticate md5 key-chain hsrp-keys
priority 90
track 2 decrement 20
ip-address 192.0.2.10
no shutdown
Additional References
For additional information related to implementing HSRP, see the following sections:
•
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release 5.0(3)U1(1)
12-16
Related Documents, page 12-17
Chapter 12
Purpose
Displays the HSRP status for all groups or one
group.
Displays the HSRP delay value for all interfaces
or one interface.
Displays the HSRP status for an interface.
Displays the HSRP status for a group or interface
for virtual forwarders in the active, init, learn,
listen, or standby state. Use the all keyword to see
all states, including disabled.
Displays a brief summary of the HSRP status for
a group or interface for virtual forwarders in the
active, init, learn, listen, or standby state. Use the
all keyword to see all states, including disabled.
Configuring HSRP