About This Guide; Fortus 380Mc/450Mc Printer; Printer Components; Access Doors And Panels - Stratasys Fortus 380mc Operation And Maintenance Manual

ABOUT THIS GUIDE

This guide provides basic instructions for the Fortus 380mc/450mc. Instructions and specifications
pertain to both the 380mc and 450mc model, unless otherwise stated. For additional information, contact
your Stratasys representative.

FORTUS 380MC/450MC PRINTER

The Fortus 380mc/450mc™ 3D Production System incorporates the latest in innovative technologies to
provide you with precise prototypes from a CAD design. Stratasys' Fused Deposition Modeling (FDM)
technology provides prototype parts, including internal features, that can be used to field-test form, fit, and
function. Direct Digital Manufacturing (DDM) allows for the creation of customized end-use parts straight
from 3D CAD data. The 380mc/450mc printer features a servo/belt driven XY gantry with multiple high
temperature modeling material capability.

PRINTER COMPONENTS

The 380mc/450mc printer system consists of the following components.
• The 380mc/450mc Printer
Modeling Material
•
• Support Material
• Insight Software Package
• A Computer Workstation (not sold by Stratasys)

ACCESS DOORS AND PANELS

Warning: The right and left upper and lower side panels, as well as the upper
and lower rear panels, should only be removed by an authorized service
representative. These components are indicated in the following figures for
reference purposes only.
This printer has been designed to allow easy access to the most frequently accessed areas on the system.
Upper Side
Panel (left &
right)
Oven Door
Lower Side
Panel (left &
right)
Canister Bay Doors
(left & right)
1
Top Cover
Touchscreen
User Interface
Emergency
Stop Button
Power Buttons:
Green - ON
Red - OFF