Installing The Edp And Camera Cable; System Board; Removing System Board - Dell Latitude 3590 Owner's Manual

Installing the eDP and camera cable

1 Route the display cable through its routing channel and secure the display cable to the LCD back cover with the adhesive tapes.
2 Connect the camera cable to its connector on the LCD back cover.
3 Replace the screws to secure the right hinge bracket to the LCD back cover.
4 Secure the eDP cable to the LCD back cover with adhesive tapes.
5 Install the:
a LCD panel
b LCD bezel
c display assembly
d Installing the WWAN card
e Installing the WLAN card
f battery
g base cover
6 Follow the procedure in

System board

Removing system board

1 Follow the procedure in
2 Remove the:
a base cover
b battery
c WLAN card
d WWAN card
After working inside your computer
Before working inside your computer.
Removing and installing components 49