Installing the system fan
1
Place the fan on the computer.
2
Tighten the 3 M2.5x5 screws to secure the fan to the computer.
3
Connect the fan cable to the system board.
4
Route the eDP cable through its routing channel on the system fan.
5
Install the:
a
battery
b
base cover
6
Follow the procedure in
Input-Output board
Removing the Input-Output board
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
3
To remove the Input-Output (I/O) board:
a
Move aside the HDD cable to access the I/O board cable [1] and remove the I/O board cable from the connector on the system
board [2].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
31