Installing the WLAN card
1
Insert the WLAN card into its connector on the system board.
2
Tuck the antenna cables underneath the left display hinge and connect the antenna cables to the WLAN card.
3
Replace the WLAN card holder on the WLAN card.
4
Tighten the M2x3 screw to secure the WLAN card and card holder to the system board.
5
Install the:
a
battery
b
base cover
6
Follow the procedure in
WWAN card – optional
Removing the WWAN card
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
3
To remove the WWAN card:
a
Remove the M2x3 screw that secures the WWAN metal bracket to the system [1] and then lift and remove the metal bracket off
the WWAN card [2].
b Disconnect the two antenna cables from the WWAN card [3].
18
Removing and installing components
After working inside your computer
Before working inside your
computer.