Installing Power Button Board; Lcd Bezel; Removing The Lcd Bezel - Dell Latitude 3590 Owner's Manual

Installing power button board

1 Place the power button board in its slot.
2 Tighten the M2x2 screw that secures the power button board to the system.
3 Affix the adhesive tape to secure the power button board to the system.
4 Secure the adhesive-backed power button board cable to the system and then connect the cable to its connector on the system
board.
5 Install the:
a display assembly
b system fan
c Installing the WWAN card
d Installing the WLAN card
e battery
f base cover
6 Follow the procedure in

LCD Bezel

Removing the LCD bezel

1 Follow the procedure in
2 Remove the:
a base cover
b Removing the WLAN card
c Removing the WWAN card
d display assembly
3 Using a plastic scribe, gently open the bezel by prying from the outer edge of the top side of the display bezel [1] , and then continue
prying the outer edges throughout the system. Lift the bezel away from the system [2].
42 Removing and installing components
After working inside your computer.
Before working inside your computer.