Installing the speakers
1
Place the speakers into the slots on the computer.
2
Affix the adhesive tape to secure the speaker cable to the computer
3
Route the speaker cable through its routing channel.
4
Connect the speaker cable to the connector on the system board.
5
Install the:
a
SSD
b
battery
c
base cover
6
Follow the procedure in
Coin cell battery
Removing the coincell battery
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
3
To remove the coin cell:
a
Pry the coincell battery until it pops out from its slot [1].
b Lift and remove the coin cell from the system [2].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
27