Installing The Edp Cable - Dell P139G Service Manual
Hide thumbs
Also See for P139G:
- Service manual (139 pages) ,
- Setup and specifications manual (30 pages) ,
- Re-imaging manual (18 pages)
Table of Contents
Advertisement
Steps
1. Peel off the tape securing the eDP cable to the back cover.
2. Remove the eDP cable from the system.
Installing the eDP cable
About this task
NOTE:
The eDP cable installation procedure is applicable only for Latitude 5320 laptop and not for the 2-in-1 configuration.
The following image indicates the location of the eDP cable and provides a visual representation of the installation procedure.
Steps
Adhere the tape to securing the eDP cable to the display back cover.
Next steps
1. Install the
display
panel.
2. Install the
display
hinges.
3. Install the
display
bezel.
4. Install the
display
assembly.
Removing and installing components
73
Advertisement
Table of Contents
