Initializing A Card; Attaching The Viewfinder Cap - Sony DSC-D700 Service Manual

To Remove the Card
1
2
1
3
3
2

Initializing a Card

Uninitialized PC cards cannot be used in the camera. Before use, cards must first be initialized using
the camera.
Caution
If you initialize a card that has data recorded on it, all recorded data, including
protected picture data, will be erased.
1
1
•OFF
•CAM
•PLAY
MENU
3 2
EXCUTE
4
EXIT
2
GB
30
Open the card cover.
Push the card eject button.
Pull out the card.
While pressing the mode lock (green), turn the
power/mode dial to CAM mode.
Note
Initializing PC cards is explained here with the
power source/mode dial set to CAM mode, but
the same operation can be performed in PLAY
mode.
Press the MENU button.
The LCD monitor turns on and the menu is
displayed.
3
Select "PC Card INIT" using the 4(UP)/
$(DOWN) buttons and then press the EXECUTE
button.
CAMERA MENU
The message "Initialize OK?" appears.
4
Press the EXECUTE button.
Initialization begins.
When initialization is complete, the LCD monitor
returns to the normal display (as shown in step 1).
Caution
Do not take out the card during
initialization. Initialization cannot proceed
normally.

Attaching the Viewfinder Cap

Place the cap on the viewfinder when taking pictures with the LCD monitor under strong sunlight,
such as outdoors. Keeping the cap on the viewfinder prevents strong rays of light from affecting the
recorded pictures.
Custom
PC Card INIT
User File Save
New Folder
ID Set
WB Flash
Date & Time
Display Set
GB
31