Sony DSC-D700 Service Manual page 86

(2) Confirmation of version
After upgrading is completed, be sure to confirm the version.
1) Open "DBG MENU" according to the procedure of 1) to 6) in step (1).
2) Select "VERSION" from "DBG MENU" using the
and press the EXECUTE button. Confirm that the "VERSION" menu is
displayed.
3) Confirm the version number of a "SYC:" item in the "VERSION" menu.
4) Press the EXIT button three times to exit the menu.
5) Set the power dial to OFF.
(3) Preset of EEPROM
After upgrading is completed, be sure to preset the EEPROM.
1) Open "DBG MENU" according to the procedure of 1) to 6) in step (1).
2) Select "EEPROM SET" from "DBG MENU" using the
button and press the EXECUTE button. Confirm that the "EEPROM
SET" menu is displayed.
3) Select "SYSTEM RESET" using the
EXECUTE button.
Note: Never reset items other than "SYSTEM RESET".
4) Press the EXIT button three times to exit the menu.
5) Set the power dial to PLAY with the card pulled out.
6) Press the MENU button while pressing the SHIFT , SPOT , and
release button.
7) USER_FILE RESET is displayed.
8) Press the EXECUTE button.
9) Set the power dial to OFF.
3-16
(DOWN) button
(DOWN)
(DOWN) button and press the
DSC-D700 (UC,CE)