Make sure the power/mode dial on the camera is
set to OFF.
Slide the battery cover lock in the direction of the
4 mark (a), and open the battery cover (b).
Remove the rubber from inside the battery cover.
Insert the DC power cable connector 4 mark side
first into the battery case until it locks firmly into
Put the cable into the battery cover groove and
close the battery cover.
There are three menus
in the camera: Shooting
Menu, Camera Menu,
and Playback Menu.
The menu for setting
shooting conditions. To
640 x 480
call up this menu, set the
power/mode dial to CAM,
turn the mode dial and press
the shift button.
Sets the exposure. Choose from Program
AE (Program), Aperture Priority AE
(Aperture), Shutter Speed AE (Shutter) or
Manual Exposure (Manual). → Page 51
Sets the flash. Choose from Automatic
Flash (Auto), On (On), Off (Off), or
External Flash (External). → Page 74
Sets the picture size. Choose from 1344 ×
1024, 640 × 480, or ×2 D. Zoom. → Page
Picture Quality Mode
Sets the picture quality. Choose from
Super, High, Midle, or Low. → Page 54
White Balance Mode
Sets the method of white balance
adjustment. Choose from Auto White
Balance (Auto), White Balance Hold
(Hold), Outdoor, or Indoor. → Page 57
Sets the ISO sensitivity. Choose from ISO
100, 200, or 400. → Page 59
Resets setting content and reads the setting
content that has been saved as user files. →
Pages 62, 64
Sets the shooting method. Choose from
Normal Shooting (1 Shot), Continuous
Shooting 1 (Cont1), Continuous Shooting 2
(Cont2), Self-Timer, or Interval Shooting
(Interval Timer). → Pages 78, 80, 81
continued on next page