Operating The Wireless Remote Control; Using A Wall Socket - Sony DSC-D700 Service Manual

Operating the Wireless Remote Control

Using the supplied wireless remote control RM-S7D, you can perform the same release button and
shift dial operations as on the camera unit.
The remote control is convenient when you want to take pictures away from the camera or for
playing back pictures on a television.
Send buttons
Send buttons function the
same as the shift dial on
the camera unit.
(Only play back pictures in
succession when used in
PLAY mode).
Note
The self-timer lamp on the front of the camera lights up briefly as signals from the remote control are
received.
When you push the release button with the focus mode switch set to AF, the focus is automatically
set before the picture is taken. There is a short time lag from the time you press the release button
until the picture is taken.
If you want to take a picture without the time lag set the focus mode switch to MF. After manually
adjusting the focus, press the release button to take the picture.
Inserting the Battery into the Remote Control
1
GB
98
Release button
(Effective in CAM mode)
Slide the battery cover in the direction of the 4
mark while pushing the cover.
2
Insert a lithium button battery CR2025 into the
battery case, making sure the + (plus) side is
visible.
3
Return the battery cover to its original position.

Using a Wall Socket

To take or play back pictures without using a battery, plug the camera into a wall socket using the
battery charger AC-V700 (not supplied) and DC power cable DK-415 (supplied with the AC-V700).
1
2
Connect the DC power cable and the AC power
cable to the battery charger.
2
Plug the AC plug from the power cable into the
wall socket.
1 1
99 GB
continued on next page