Initializing A Card - Sony DSC-D770 Operating Instructions Manual

Initializing a Card

Uninitialized PC cards cannot be used in the camera. Before use, cards must first be initialized using
the camera.
Caution
If you initialize a card that has data recorded on it, all recorded data, including
protected picture data, will be erased.
1
3
GB
30
To Remove the Card
1
2
1
3
3
2
1
•OFF
•CAM
•PLAY
MENU
2
EXCUTE
4
EXIT
2
Open the card cover.
Push the card eject button.
Pull out the card.
While pressing the mode lock (green), turn the
power/mode dial to CAM mode.
Note
Initializing PC cards is explained here with the
power source/mode dial set to CAM mode, but
the same operation can be performed in PLAY
mode.
Press the MENU button.
The LCD monitor turns on and the menu is
displayed.