Sony DSC-D700 Service Manual page 31

7
Specify a program folder name and click [Next].
The "Start Copying Files" dialog box appears.
8
Confirm the displayed installation settings and click [Next].
Installation starts and the "Sony MSAC-PR1 Drive Identification" dialog box
appears.
GB
48
9
Confirm the drive name of the PC card/parallel port adaptor and click [OK].
The "Setup Complete" dialog box appears.
10
Click [Finish].
In step 9, if the "Yes, I want to read the README file now" box is checked, the
README document is displayed. Installation is complete.
Inserting the Card
When you insert the card into the PC Card/Parallel port Adaptor, the drive that was specified as the
drive name in step 8 of the "Install Driver" directions (page 48) is recognized. You can now manage
the card contents on your computer.
Note
When using the Memory Stick, insert the Memory Stick into the Memory Stick/PC
Card Adaptor.
1
1
Make sure the power/access lamp is not flashing.
Caution
If you insert the card when the power/
access lamp is flashing, you may damage
the PC Card or Memory Stick.
2
2
Make sure the 4 mark is facing up and slowly
slide the card into the card insertion slot.
GB
continued on next page 49