Unit Versions Of Cpu Units - Omron CP1E-E14SDR-A User Manual

2 Basic System Configuration and Devices
Installation and Wiring Products
Name and appearance
DIN Track
End Plate
I/O Connecting Cable
2-2-3

Unit Versions of CPU Units

Unit Versions
A "unit version" has been introduced to manage CPU Units in the CP Series according to differences in
functionality accompanying Unit upgrades.
Notation of Unit Versions on Products
The unit version is given to the right of the lot number on the nameplate of the products for which
unit versions are being managed, as shown below.
Product nameplate
CP1E-N40DR-A
CPU UNIT
Lot No. 28705 0000 Ver.1.0
OMRON Corporation
Lot No.
Confirming Unit Versions with Support Software
CX-Programmer can be used to confirm the unit version of the CP1E CPU Units.
Refer to 4-1 Applicable Programming Devices for CP1E for details on the CX-Programmer.
The CX-Programmer can be used to confirm the unit version using one of the following methods.
• Using the PLC Information
• Using the Unit Manufacturing Information
2-10
Model number
PFP-50N
PFP-100N
PFP-100N2
PFP-M
CP1W-CN811
MADE IN CHINA
Unit version
(example for unit version 1.0)
Specifications and application
Track length: 50 cm, Height: 7.3 mm
Track length: 1 m, Height: 7.3 mm
Track length: 1 m, Height: 16 mm
Stopper to prevent Units from moving on the DIN Track.
Length: 800 mm
This cable is used if the connecting cable for the Expansion I/O
Unit or Expansion Unit is not long enough or for a vertical configu-
ration.
Only one I/O Connecting Cable can be used in each PLC.
CP1E CPU Unit
CP1E CPU Unit Hardware User's Manual(W479)