Terminology And Notation - Omron CP1E-E14SDR-A User Manual

Terminology and Notation

Term
E-type CPU Unit
N-type CPU Unit
NA-Type CPU Unit
CX-Programmer
6
A basic model of CPU Unit that support basic control applications using instructions such
as basic, movement, arithmetic, and comparison instructions.
Basic models of CPU Units are called "E
The models of E (S)-type CPU Units are shown below.
CP1E-E D -
CP1E-E SD -
An application model of CPU Unit that supports connections to Programmable Terminals,
inverters, and servo drives.
Application models of CPU Units are called "N
The models of N (S)-type CPU Units are shown below.
CP1E-N D -
CP1E-N SD -
CP1E-N S1D -
An application model of CPU Unit that supports built-in analog and connections to Pro-
grammable Terminals, inverters, and servo drives.
Application models of CPU Units with built-in analog are called "NA-type CPU Units" in
this manual.
A programming device that applies for programming and debugging PLCs.
The CX-Programmer includes the Micro PLC Edition CX-Programmer (CX-One Lite), the
CX-Programmer (CX-One) and the CX-Programmer for CP1E.
This manual describes the unique applications and functions of the Micro PLC Edition
CX-Programmer version 9.03 or higher/CX-Programmer for CP1E.
"CX-Programmer" refers to the Micro PLC Edition CX-Programmer version 9.03 or
higher/CX-Programmer for CP1E in this manual.
Note E20/30/40(S) and N20/30/40(S ) CPU Units are supported by CX-Programmer
version 8.2 or higher. E10/14(S), N14/60(S ) and NA20 CPU Units are supported
by CX-Programmer version 9.03 or higher. E60S CPU Units are supported by CX-
Programmer version 9.42 or higher.
Description
(S)-type CPU Units" in this manual.
(S)-type CPU Units" in this manual.
CP1E CPU Unit Hardware User's Manual(W479)