How To Configure The Simatic Pdm Server - Siemens SIMATIC PCS 7 Service Manual

6.2.7

How to configure the SIMATIC PDM Server

Requirements
● The project/multiproject has been created.
● The SIMATIC PDM (Server) software package is installed on the Engineering Station.
Selecting the name of the PC station
Note
Restrictions
The following restrictions must be observed:
● Valid characters: [A-Z 0-9]{1,32}
● Use uppercase letters only.
● The first character of the PC station's name must be a letter.
● Maximum length: 32 characters
Note
We recommend that the PC name is the same as the name of the station.
Procedure
1. Select the Options > SIMATIC PDM > Settings command in SIMATIC Manager.
2. Select the "Maintenance Station" tab.
3. Go to the input field and enter the project/multiproject in which you have defined the MS
4. Click "OK".
Software update without utilization of new functions
Service Manual, 03/2012, A5E02779792-02
Note
Requirements for the use of SIMATIC PDM
Please observe the conditions for the use of SIMATIC PDM versions.
The "SIMATIC PDM settings" dialog box opens.
server or execute the following steps:
– In a multiproject:
Click "Current Multiproject" or "Browse." You can select the current project using the
"Browse" button.
– For a project:
Click on "Current Project" or "Browse." You can select the current project using the
"Browse" button.
Adaptations in the PCS 7 project on the ES
6.2 General adaptations
39