Siemens SIMATIC PCS 7 Service Manual page 49

Operating system of the MS Server
Windows XP
Windows Server 2003
Windows Server 2008
Windows Server 2008 R2
Windows 7
Requirements
● The blocks, charts and OS pictures of the project are updated.
● The SIMATIC programs and OS are compiled.
● The PC stations of the Maintenance Station (MS Server and MS Client) are updated in a
● MS single station system
● MS multiple station system
Procedure
1. Select the PC station in the Component View.
2. Double-click the "Configuration" object in the Detail View to open HW Config.
3. Select the current version of the OPC Server from the hardware catalog at SIMATIC PC
4. Click "OK" to confirm the replacement of the OPC Server.
5. Save and compile your changes.
6. Select the "OPC Server" object in the rack.
7. Select the menu command Station > Properties.
8. Open the "SNMP" tab.
9. Click the "Export Tags for WinCC" button.
10.Select the Station > Save and Compile menu command.
Software update without utilization of new functions
Service Manual, 03/2012, A5E02779792-02
similar way to an OS.
– An OPC Server is configured on the PC Station of the MS single station system.
– In a system with redundant MS Servers, you configured an OPC Server both for the PC
Station of the MS Server and for the PC Station of the redundant partner.
– In an MS multiple station system, this is the PC Station of the MS Server or of the
redundant partner.
– In an MS single station system, this is the PC Station of the MS single station system.
The hardware configuration of the SIMATIC PC station opens.
If you cannot see the hardware catalog, select the View > Catalog menu command.
The hardware catalog opens.
Station > User application > OPC Server and drag-and-drop it to the position of the OPC
Server.
Adaptations in the PCS 7 project on the ES
6.5 Adaptations for the Maintenance Station
OPC Server version
V7.0
V8.1
49