Activate The Operator Stations - Siemens SIMATIC PCS 7 Service Manual

Activate the operator stations

9.1 Overview of activating the operator stations
Introduction
The following sequence applies when activating process mode (runtime):
● Master server (OS server)
● Standby server (redundant OS server)
● OS clients
Overview of the procedure
Step
25
26
9.2 How to Check the Settings on the OS Servers
Introduction
Before activating the projects downloaded to the various OS servers, you need to check some
of the settings in each OS as a safety precaution.
Requirement
● The PCS 7 OS is open in WinCC Explorer.
Procedure
1. Open the "Redundancy" editor in WinCC Explorer.
2. Check all settings.
3. Click "OK".
4. Open the "Time Synchronization" editor in WinCC Explorer.
5. Check all of the settings in the dialog box.
6. Click "OK".
Software update without utilization of new functions
Service Manual, 03/2012, A5E02779792-02
Action
Checking the settings of the OS Servers (Page 61)
Checking the settings on the OS Clients (Page 62)
ES OS OS
server client
X
X
9
AS
61