Downloading Of Target Systems - Siemens SIMATIC PCS 7 Service Manual

Downloading of Target Systems

8.1 Downloading of Target Systems
Once you have updated your PCS 7 project offline, you must download the changes to the
target systems.
Information on Updating a Redundant OS in Runtime
CAUTION
Updating a Redundant OS During Operation (in accordance with manual
Process Control System PCS 7; Fault-tolerant Process Control Systems ; Guide to
Updating a Redundant OS During Operation)
If you update a redundant OS during operation, do not load the AS until phase 3 (in step 6
of the Fault-tolerant Process Control Systems manual).
Requirement
● The network addresses and network settings of the PC stations are configured.
● The configuration of the PC stations match in HW Config and in the Station Configuration
● The configuration of the PC stations is loaded on the PC stations.
Procedure
1. Download connection data to all stations via NetPro. Begin with the ES.
2. Check the setting for the access points on each PC station (locally).
3. You can successively download all target systems systematically and automatically. In
Software update without utilization of new functions
Service Manual, 03/2012, A5E02779792-02
Editor.
In the submenu SIMATIC > SIMATIC NET of the Windows Start menu, select the menu
command Configuration Console.
SIMATIC Manager, select the menu command PLC > Compile and Download Objects.
You can find more information on loading options in the configuration manual
Control System PCS 7; Engineering Station .
8
Process
59