How To Configure A Central Archive Server And Its Redundant Archive Partner Server - Siemens SIMATIC PCS 7 Function Manual

Advantages of fault-tolerant components
4.5 Operator stations
Result
Your project should now correspond to the project shown in the following figure. You can
change the names of the components as you wish.
Additional information
● Configuration manual
● Online help on
● For information pertaining to the NDIS settings for a Maintenance Station, refer to the
4.5.3

How to configure a central archive server and its redundant archive partner server

Introduction
The following describes the individual steps involved in creating the archive server and its
redundant archive partner server.
130
to Expand a Project with Pre-Configured Stations Using the PCS 7 Wizards"
STEP 7
Process Control System PCS 7; PC Configuration and Authorization manual.
Process Control System PCS 7; Engineering System ; section "How
Fault-tolerant Process Control Systems (V8.0)
Function Manual, 03/2012, A5E02779471-02