Stopping The Engine - Hitachi ZX27U-2 Operator's Manual

STOPPING THE ENGINE

Stop the engine following the steps below.
1. Before stopping the engine, lower the bucket and
blade to the ground unless specified.
2. Return the engine control dial or the engine control
lever to the slow idle position and keep the engine
running at slow idle speed for 5 minutes.
3. Turn the key switch (2) OFF to stop the engine.
4. Pull up pilot control shut-off lever (1) to the LOCK po-
sition.
OPERATING THE ENGINE
3-6
2
M1M7-01-007
1
M1M7-03-001