Am/Fm Radio Operation - Hitachi ZX27U-2 Operator's Manual

Hydraulic excavator zaxis series
Table of Contents

Advertisement

AM/FM RADIO OPERATION

Part Name and Function
1- Power Switch/Volume Control Knob
Rotate the knob to the right to supply electric power
(a click sound will be heard when the unit is turned
ON). Rotate the knob further to turn up the volume.
Rotate the knob in the reverse direction to turn down
the volume and the unit OFF.
2- Tone Control Knob
Rotate the knob to the right to intensify the treble.
Rotate the knob to the left to reduce the treble.
3- Display
Time, receiving radio wave frequency, or operation
mode is displayed.
4- Clock Button
Press this button to display the time. Repress this
button to display the receiving radio wave frequency.
5- Auto-Store/ Scan Preset Button (AST)
Press this button to receive the preset frequency
station for every 5 seconds sequentially. While you
receive the station you wish to listen to, press this
button again to receive the station under normal
state (scan is interrupted). Press and hold this button
for 2 seconds to automatically store the station.
6- Station Preset Buttons (1 to 6)
One FM and MW (AM) station per button can be
preset using these respective buttons.
7- Seek Button
Press this button to automatically seek the next re-
ceivable station. When a station is received, the
auto-seeking function is deactivated.
8- Band Button
Select FM or MW (AM) by pressing this button. The
display indicates the receiving station frequency.
9- Tuning Button
Tap the TUNE ∧ button to increase the frequency.
Tap the TUNE ∨ button to decrease the frequency.
Tap and hold the button to change the frequency
continuously.
Radio Operation
1. Turn the key switch to the ACC or ON position to
switch the radio ON.
2. Select either MW (AM) or FM by operating the brand
button.
3. Select the station desired to listen using the preset or
tuning button.
4. Adjust the volume and tone according to your pref-
erence.
5. When turning the radio OFF, rotate the VOL knob to
the left until a click sound is heard.
OPERATOR'S STATION
1-16
2
1
3
6
9
8
5
7
4
M1M7-01-011

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zx30u-2Zx35u-2Zx40u-2Zx50u-2

Table of Contents