Replace Fuel Filter - Hitachi ZX27U-2 Operator's Manual

Replace Fuel Filter

--- every 500 hours
1. Close stop valve (1).
2. Remove fuel filter (2) with a fuel filter wrench.
3. Clean the mounting surface for fuel filter (2).
4. Install new fuel filter (2) while rotating the fuel filter
clockwise until the fuel filter comes in contact with the
mounting surface. Tighten the fuel filter about 1/2
turns more using the filter wrench.
NOTE: Tightening torque: 11.8 to 15.6 N
⋅
kgf m, 9 to 11.5 lbf
5. Open stop valve (1).
6. Turn the key switch ON and hold for 10 to 15
seconds.
7. Start the engine and check the fuel system for fuel
leaks.
MAINTENANCE
⋅
m (1.2 to 1.6
⋅
ft)
2
7-39
Tighten
Loosen
1
M1M7-07-040
M1M7-07-007