Key Switch; Switch Panel - Hitachi ZX27U-2 Operator's Manual

KEY SWITCH

1- OFF (Engine OFF)
2- ON (Engine ON)
3- START (Engine Start)
4- HEAT (Engine Preheat)

SWITCH PANEL

5- Work Light Switch
Press the top side of switch (5) to turn work lights (9)
located on the boom and cab roof front ON. Press
the bottom side of switch (5) to turn work lights (9)
OFF.
6- Travel Mode Switch
Press the rabbit-mark side of switch (6) to select the
fast travel mode. However, when the travel load be-
comes heavy, the slow travel mode will automatically
be selected. Press the turtle-mark side of switch (6)
to select the slow travel mode.
7- Wiper Switch (Cab equipped machine)
Three-operation positions are provided on this
switch.
OFF: Both the wiper and washer do not operate.
Center: The wiper operates.
WASHER: The washer operates together with the
wiper.
8- Auxiliary Flow Control Switch
(Optional: Except ZX27U
The hydraulic oil flow in the auxiliary pipe line can be
controlled.
OPERATOR'S STATION
)
-2
M1M7-01-025
2
1
4
ZX30U
-2,
5
9
ZX30U
1-4
3
6 5
ZX27U (Canopy)
-2
6
ZX35U ZX40U ZX50U
-2, -2,
6 5 7
ZX27U (Cab)
-2
6 7 8
ZX35U ZX40U ZX50U
-2, -2, -2,
M1M7-01-007
M1M7-01-033
5
8
(Canopy)
-2
M1M7-05-026
M1M7-01-036
(Cab)
-2
M1M7-01-024