Monitor Panel; Coolant Temperature Gauge; Fuel Gauge - Hitachi ZX27U-2 Operator's Manual

MONITOR PANEL

1- Coolant Temperature Gauge

2- Fuel Gauge

3- Liquid Crystal Display (Hour Meter, etc)
4- Set Switch
5- Display Control Switch
6- Auto-Idle Indicator (Except ZX27U
7- Auto-Idle Switch (Except ZX27U
8- Fast Travel Mode Indicator
9- Preheat Indicator
10- Alternator Indicator
11- Fuel Level Indicator
12- Overheat Indicator
13- Engine Oil Pressure Indicator
14- System Failure Indicator
Coolant Temperature Gauge
The gauge segment position indicates the engine cool-
ant temperature. When the first three segments come
ON, the coolant temperature is normal.
NOTE: When the coolant temperature is lower than
° °
20 C (68 F), the first segment will flash.
Fuel Gauge
The gauge segment position indicates the fuel level. Re-
fill the fuel before only the E-marked segment comes
ON.
NOTE: Even though the key switch is OFF, when the
display control switch is continuously pressed
for more than 0.5 seconds, the fuel level is dis-
played. As long as the display control switch is
kept pressed, the gauge indicates the fuel level.
When the switch is released, the gauge stops
indication the fuel level.
IMPORTANT: In case all segments flash, the machine
is abnormal. Immediately, contact your
authorized dealer.
OPERATOR'S STATION
)
-2
)
-2
1-5
1
14
13
12
11
10
9
8
ZX27U
-2
1
14
13
12
11
10
9
8
ZX30U ZX35U ZX40U
-2, -2,
2
3
4
5
M1M7-01-031
2
3
4
5
6
7
M1M7-01-028
ZX50U
-2, -2
M1SM-05-008
M1SM-01-003