Table of Contents
Advertisement
WARNING: Always wear safety glasses or gog-
gles when using compressed air.
Cleaning
Clean the re-circulation filter by blowing compressed air
or with water.
When cleaning the filter with water, follow the procedure
below.
1. Clean the filter using tap water.
2. Hold the filter in water with a neutral detergent dis-
solved for about 5 minutes.
3. Clean the filter again with water.
4. Dry the filter.
Installation
Install the cleaned filters or new filters by following the
removal procedure described on the previous page in
the reverse order.
•
Insert filters (4 and 6) into the grooves on both sides.
Install filter (5) into the center duct.
MAINTENANCE
7-64
4
5
M1M7-07-053
M1M7-07-054
6
M1M7-07-055
Advertisement
Table of Contents
