Siemens simodrive 611 Configuration Manual page 8

Preface
Table -3: ESDS instructions
ESDS instructions
Caution
An electrostatic-sensitive device (ESDS) is an individual component, integrated circuit, or
module that can be damaged by electrostatic fields or discharges.
ESDS regulations for handling boards and equipment:
When handling components, make sure that personnel, workplaces, and packaging are well
earthed!
Personnel in ESD zones with conductive floors may only touch electronic components if they
are
– grounded through an ESDS bracelet and
– wearing ESDS shoes or ESDS shoe grounding strips.
Electronic boards should only be touched if absolutely necessary.
Electronic boards must not come into contact with plastics or items of clothing containing syn-
thetic fibers.
Electronic boards may only be placed on conductive surfaces (table with ESDS surface, con-
ductive ESDS foam rubber, ESDS packing bag, ESDS transport containers).
Electronic boards may not be brought close to data terminals, monitors or television sets.
(minimum clearance > 10 cm).
Measurements may only be carried out on electronic boards and modules if
– the measuring instrument is grounded (e.g. via a protective conductor) or
– before making measurements with a potential-free measuring device, the measuring head
is briefly discharged (e.g. by touching an unpainted blank piece of metal on the control cabi-
net).
Standards, regulations
The appropriate standards, regulations are directly assigned to the functional requirements.
viii
Configuration Manual, (PFT6), 10.2005 Edition, 6SN1197-0AD02-0BP1
1FT6 Synchronous Motors