Connection Through A Terminal Box - Siemens simodrive 611 Configuration Manual

Electrical Connections

Connection through a terminal box

2.2 Connection through a terminal box
• The terminal assignment in the terminal box must be implemented according to the dia-
gram.
• The protective conductor must be connected.
• Cable lugs acc. to DIN 46234 must be used.
• Connect up an optional brake (refer to the diagram).
Notice
Motors with a rated power of more than 100 kW must be grounded using the additional
M12 grounding stud provided at the NDE bearing endshield.
Fig. 2-2
Table 2-1
2-2
Terminal assignment in the terminal boxes
Description of the diagram
No. Description
1 M5 connecting studs
2 M10 connecting studs
3 M4 grounding stud
4 M6 grounding stud
No.
5
6
BD1+ / BD2-
Configuration Manual, (PFT6), 10.2005 Edition, 6SN1197-0AD02-0BP1
Description
M10 grounding studs
M4 connecting studs
Brake connection
1FT6 Synchronous Motors